2007-2008 Yamaha YFM700 Grizzly Factory Service Manual, Page 78Get this manual
CABLE ROUTING M Joint coupler lead To left headlight Connect the headlight lead coupler, and then fasten the coupler with the holder on the electrical components tray Route the negative battery lead along the guide on the electrical components tray To right headlight Place the couplers on the inside of the electrical components tray
To main switch and auxiliary DC jack Fasten the left handlebar switch lead, on-command four-wheel-drive motor switch and differential gear lock switch lead, front brake light switch lead, and rear brake light switch lead with the clamp Fasten the joint coupler lead with the clamp Pass the coolant reservoir breather hose through the guides on the plastic cover and electrical components tray and route it under the positive battery lead and starter motor lead