2007-2008 Yamaha YFM700 Grizzly Factory Service Manual, Page 70Get this manual
CABLE ROUTING Route the ground lead, radiator fan motor breather hose, differential gear case breather hose, and EPS motor breather hose to the inside of the fast idle plunger outlet hose Pass the radiator fan motor breather hose through the larger diameter guide Route the coolant reservoir breather hose to the outside of the fast idle plunger outlet hose Route the fuel injector lead under the fuel hose
Fasten the radiator outlet hose to the frame with the plastic band, making sure to face the end of the band inward Route the EPS motor breather hose under the coolant reservoir hose Place the EPS torque sensor lead and differential gear motor lead in the holder, and then insert the ends of the holder into the hole in the stay on the frame Route the differential gear case breather hose to the inside of the frame