2007-2008 Yamaha YFM700 Grizzly Factory Service Manual, Page 67Get this manual
CABLE ROUTING Pass the EPS motor breather hose through the guide on the meter bracket, making sure to face the end of the hose downward Route the radiator fan motor breather hose and differential gear case breather hose in front of the frame Fasten the differential gear case breather hose to the frame with the plastic band, making sure to face the end of the band inward Route the differential gear case breather hose to the inside of the frame
Fasten the front brake light switch lead, on-command four-wheel-drive motor switch and differential gear lock switch lead, left handlebar switch lead, and rear brake light switch lead with plastic locking tieBe sure to fasten the plastic locking tie above the couplers and fasten it around the protective sleeves of the leads, not the leads themselves Pass the final gear case breather hose through the guide on the meter bracket, making sure to face the end of the hose downward