2006-2009 Yamaha YFM700RV Raptor 700RV factory service manual, Page 251Get this manual
FUEL INJECTION SYSTEM EAS00905
DIAGNOSTIC MODE It is possible to monitor the sensor output data or check the activation of actuators with the FI diagnostic tool connected to the vehicle and set to the normal mode or the diagnostic monitoring modeFI diagnostic tool 90890-03182, YU-03182 Setting the normal mode NOTE: The engine speed, engine temperature, and fault code, if detected, can be displayed on the LCD of the FI diagnostic tool when the tool is connected to the vehicle and is set to the normal mode1
1Turn the main switch to "OFF" and set the engine stop switch to "RUN"2Remove the self-diagnosis signal coupler cap, and then connect the FI diagnostic tool as shown3Turn the main switch to "ON" and start the engineNOTE: Coolant temperature and engine revolution appear on the LCD of the FI diagnostic tool "POWER" LED (Green) comes on If malfunction is detected in the system, "WARNING" LED (Orange) comes on_