2006-2009 Yamaha YFM700RV Raptor 700RV factory service manual, Page 176Get this manual
VALVES AND VALVE SPRINGS 2Replace: valve guide
NOTE: To ease valve guide removal and installation, and to maintain the correct fit, heat the cylinder head to 100 (212 F) in an ovenMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMM
aRemove the valve guide with the valve guide remover 1bInstall the new valve guide with the valve guide remover and valve guide installer 2cAfter installing the valve guide, bore the valve guide with the valve guide reamer to obtain the proper stem-to-guide clearanceValve guide remover (6) 90890-04064 Valve guide remover (6.0 mm) YM-04064-A Valve guide installer (6) 90890-04065 Valve guide installer (6.0 mm) YM-04065-A Valve guide reamer (6) 90890-04066 Valve guide reamer (6.0 mm) YM-04066