2006-2009 Yamaha YFM700RV Raptor 700RV factory service manual, Page 97Get this manual
ADJUSTING THE VALVE CLEARANCE ADJUSTING THE ENGINE IDLING SPEED
dHold the adjusting screw to prevent it from moving and tighten the locknut to the specified torqueLocknut 14 Nm (1.4 kg, 10 ft lb)
eMeasure the valve clearance againfIf the valve clearance is still out of specification, repeat all of the valve clearance adjustment steps until the specified clearance is obtainedLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLL
8Install: timing mark accessing screw
6 Nm (0.6 kg, 4.3 ft lb) 10 Nm (1.0 kg, 7.2 ft lb)
crankshaft end accessing screw 9Install: spark plug 13 Nm (1.3 kg, 9.4 ft lb) 10.Connect: spark plug cap 11.Install: O-ring New camshaft sprocket cover