2006-2009 Yamaha YFM700RV Raptor 700RV factory service manual, Page 83Get this manual
CABLE ROUTING Secure the plastic band by inserting the projection on the band into the hole in the frame, and then fasten the leads where the throttle position sensor lead branches off from the other leads, making sure to face the end of the band rearward From the left side of the vehicle Install the hose (air filter joint to right side of throttle body) onto the pipe on the air filter joint
Route the leads that branch off from the wire harness over the fast idle plunger outlet hose and to the right of the hose (air filter joint to right side of throttle body) Route the fuel injector lead over the intake air pressure sensor Route the headlight lead over the frame, connect the headlight coupler, and then insert the projection on the coupler into the hole in the stay on the front fender bracket