2006-2009 Yamaha YFM700RV Raptor 700RV factory service manual, Page 70Get this manual
CABLE ROUTING Route the reverse control cable under the oil tank outlet hose Pass the plastic band through the space between the frame and the frame support, and then fasten the wire harness to the frame with the band, making sure to face the end of the band inward
Route the resistor lead over the frame, making sure that its coupler is positioned to the inside of the frame Route the headlight lead over the frame, connect the headlight coupler, and then insert the projection on the coupler into the hole in the stay on the front fender bracket