2006-2009 Yamaha YFM700RV Raptor 700RV factory service manual, Page 69Get this manual
CABLE ROUTING Route the coolant reservoir hose in front of the radiator fan breather hose, and then connect it to the radiator Pass the radiator fan breather hose through the wire guide Route the throttle cable on top of the fuel tank shield Pass the fuel tank breather hose through the hole in the handlebar cover, and then insert the end of the hose into the steering stem
Route the wire harness to the inside of the frame Connect the A.Cmagneto lead, wire sub lead, rear brake switch lead, and speed sensor lead, and then fasten the leads with the plastic bandFace the end of the plastic band inward Fasten the oil tank outlet hose and reverse control cable with the clamp, making sure that the reverse control cable does not contact the edge of the engine stay