2006-2009 Yamaha YFM700RV Raptor 700RV factory service manual, Page 53Get this manual
HOW TO USE THE CONVERSION TABLE GENERAL TIGHTENING TORQUE SPECIFICATIONS EBS00022 EBS00023
HOW TO USE THE CONVERSION TABLE
All specification data in this manual are listed in SI and METRIC UNITSUse this table to convert METRIC unit data to IMPERIAL unit dataExMETRIC mm mm MULTIPLIER 0.03937 0.03937= IMPERIAL in 0.08 in
GENERAL TIGHTENING TORQUE SPECIFICATIONS
This chart specifies tightening torques for standard fasteners with standard ISO thread pitchTightening torque specifications for special components or assemblies are provided for each chapter of this manualTo avoid warpage, tighten multi-fastener assemblies in crisscross pattern and progressive stages until the specified tightening torque is reachedUnless otherwise specified, tightening torque specifications require clean, dry threadsComponents should be at room temperatureA: Distance between flats B: Outside thread diameter (nut) 10 mm 12 mm 14 mm 17 mm 19 mm 22 mm (bolt) mm mm 10 mm 12 mm 14 mm 16 mm General tightening torques Nm 15 30 55 85 130 kg 0.6 1.5 3.0 5.5 8.5 13.0 ft lb 4.3 11 22 40 61 94