2004-2005 660 Yamaha Rhino Factory Service Manual, Page 279Get this manual
REAR CONSTANT VELOCITY JOINTS, FINAL DRIVE GEAR AND DRIVE SHAFT
6) Round off the hundredth digit and select the appropriate shim(s)In the example above, the calculated number is 0.48The chart instructs you to round off to 10 at the hundredth placeThus, the shim thickness is 0.50 mmHundredths 0, 1, 3, 4, 5, 6, 8, Rounded value 10
Shims are supplied in the following thicknessesRing gear shim Thickness (mm) 0.25 0.40 0.30 0.45 0.35 0.50
LLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLL