2004-2005 660 Yamaha Rhino Factory Service Manual, Page 274Get this manual
REAR CONSTANT VELOCITY JOINTS, FINAL DRIVE GEAR AND DRIVE SHAFT
ASSEMBLING THE REAR CONSTANT VELOCITY JOINTS 1Apply: molybdenum disulfide grease (into the ball joint assembly) 2Install: dust boots boot bands 2, New
MMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMM
aApply molybdenum disulfide grease into the dust bootsMolybdenum disulfide grease 40 (1.8 oz) per dust boot (rear wheel side) 60 (2.3 oz) per dust boot (final gear case side) bInstall the dust bootscInstall the dust boot bandsNOTE: The new boot bands may differ from the original ones The dust boots should be fastened with the boot bands at the grooves in the joint shaftLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLL