2004-2005 660 Yamaha Rhino Factory Service Manual, Page 224Get this manual

2004-2005 660 Yamaha Rhino Factory Service Manual, Page 224

MIDDLE GEAR

INSTALLING THE MIDDLE DRIVEN SHAFT 1Install: bearing retainer Bearing retainer 80 Nm (8.0 kg, 58 ft lb) LOCTITE

NOTE: Attach the ring nut wrench 2Ring nut wrench PNYM-38404, 90890-01430 CAUTION: The middle driven shaft bearing retainer has left-handed threadsTo tighten the retainer, turn it counterclockwise2Install: bearing retainer 1

Back to 2004-2005 660 Yamaha Rhino Factory Service Manual