2004-2005 660 Yamaha Rhino Factory Service Manual, Page 151Get this manual
CAMSHAFT AND CYLINDER HEAD
dPlace 400600 grit wet sandpaper on the surface plate, and resurface the head using figure-eight sanding patternNOTE: To ensure an even surface rotate the cylinder head several timesLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLL
INSTALLING THE CAMSHAFT AND CYLINDER HEAD 1Install: cylinder head gasket New cylinder head bolts (M9:6)
38 Nm (3.8 kg, 27 ft lb) 10 Nm (1.0 kg, 7.2 ft lb)R
bolt (M6: 7)