2004-2005 660 Yamaha Rhino Factory Service Manual, Page 48Get this manual
TIGHTENING TORQUES Part to be tightened Steering knuckle and front lower arm Tie-rod locknut Steering knuckle and tie-rod Front arm protector and front lower arm Seat belt and frame Seat belt and side frame (enclosure) Front wheel and front wheel hub Front wheel hub and constant velocity joint Steering knuckle and brake disc guard Front brake caliper and front wheel hub Front brake hose union bolt Front brake hose holder and steering knuckle Front brake hose holder and front upper arm Front brake hose and frame Front brake hose holder and frame Front brake pad holding bolt Front brake disc and front wheel hub Front brake caliper bleed screw Rear wheel and rear wheel hub Rear wheel hub and constant velocity joint Rear brake hose and frame Brake pipe and brake master cylinder Brake pipe and rear brake hose Pedal assembly and frame Brake master cylinder and pedal assembly Secondary brake master cylinder kit stopper bolt Brake rod locknut Rear brake disc and brake disc boss Rear brake pad holding bolt Rear brake caliper and final drive pinion gear bearing housing Rear brake hose union bolt Parking brake case and rear brake caliper Parking brake lever assembly and frame Rear brake caliper bleed screw Cargo bed latch and frame Cargo bed release lever Damper and cargo bed assembly Hinge cover and cargo bed assembly Cargo bed panel and cargo bed assembly Mud guard and cargo bed assembly Front bumper protector and front bumper Thread size M12 M12 M12 M6 M10 716 M10 M20 M6 M10 M10 M6 M6 M6 M6 M8 M8 M6 M10 M20 M6 M10 M10 M8 M8 M6 M8 M6 M8 M10 M10 M8 M6 M6 M10 M6 M8 M8 M6 M6 M6