2002 Yamaha YFM660 Grizzly factory service and repair manual, Page 313Get this manual
FRONT AND REAR BRAKES
INSTALLING THE FRONT BRAKE MASTER CYLINDER 1.Install: Brake master cylinder 1
7 Nm (0.7 kg, 5.1 ft lb)
NOTE: The "UP" mark on the brake master cylinder bracket should face up
2.Install: Copper washers New Brake hose Union bolt 27 Nm (2.7 kg, 19 ft lb) NOTE: Tighten the union bolt while holding the brake hose as shownTurn the handlebar to the left and to the right to check that the brake hose does not touch other parts (throttle cable, wire harness, leads, etcCorrect if necessaryTRR