2002 Yamaha YFM660 Grizzly factory service and repair manual, Page 98Get this manual
ADJUSTING THE STARTER CABLE CHECKING THE SPARK PLUG
ADJUSTING THE STARTER CABLE 1.Remove: Seat Fuel tank side panel (left) 2.Adjust: Adjustment steps: Disconnect the starter cable from the carburetor bodyNOTE: Do not remove the starter plunger from the starter cable Measure
the starter plunger stroke distance of the starter lever fully close to fully open positionIf the distance is out of specification adjust it as described belowStarter plunger stroke distance: 15 mm (0.59 in)
Fully closed position Fully open position