1998-2001 Yamaha YFM600FHM Grizzly Factory Service Manual, Page 243Get this manual
CONSTANT VELOCITY JOINTS AND DIFFERENllAL GEAR .Install the bearing
IDRIV I-F-I
CD onto the yoke
i!!:::I!llllIIi:!:III: _
Check each bearingThe needles can easily fall out of their racesSlide the yoke back and forth on the bearings; the yoke will not go all the way onto bearing if needle is out of place Press each bearing into the U-joint using suitable socketNOTE: _ The bearing must be inserted far enough into the U-joint so that the circlip can be installed Install the circlips each bearing
into the groove of