1998-2001 Yamaha YFM600FHM Grizzly Factory Service Manual, Page 19Get this manual
CABLE ROUTING illl Pass the carburetor overflow hose and carburetor drain hose through the metal guide on the swingarm[f] Fasten the starter motor lead with metal clamp[Q] Fasten the COl magneto lead and thermo unit lead with metal clampPass the speedometer cable and select lever control cable through the metal guide[] Pass the carburetor overflow hose and the carburetor drain hose toward the left side of the vehicle and between the engine and the framePass the starter cable through the wire guide
[Q) Fasten the battery negative lead (ground lead),
neutral switchreverse switch lead, starter motor lead, thermo unit lead and rear brake breather hose with plastic clamp[8] Fasten the oil cooler hoses with plastic locking tieThe plastic locking tie should not be overtightenedill Fasten the oil cooler hoses to the frame with plastic locking tieThe plastic locking tie should not be overtightenedQJ Fasten the headlight lead with plastic clampIKJ Pass the rectifierregulator lead behind the COl unit lead