1997 Yamaha YFM600FWAK ATV Service Manual, Page 57Get this manual
CABLE ROUTING Taillight lead Wire harness Speedometer cable Oil cooler hose
Pass the starter cable through the wire guide
[] Pass the carburetor overflow hose and carburetor drain hose through the metal guide on the swingarm[Q] Fasten the starter motor lead with metal clampFasten the COl magneto lead and thermo unit lead with metal clamp
[I] Pass the speedometer cable through the metal guide[] Pass the carburetor overflow hose and the carburetor drain hose toward the left side of the vehicle and between the engine and the frame[Q] Fasten the battery negative lead (ground lead), neutral switchreverse switch lead, starter motor lead, thermo unit lead and rear brake breather hose with plastic clamp[8J Fasten the oil cooler hoses with the plastic locking tieThe plastic locking tie should not be overtightened[IJ Fasten the oil cooler hoses to the frame with the plastic locking tie