1987-2009 Yamaha ATV YFM350X Warrior Raptor Service Manual, Page 367Get this manual
CABLE ROUTING Fasten the parking brake cable and clutch cable with the clipFasten the clip to the clutch cable between the cable protector and the clutch cable adjuster Pass the parking brake cable and clutch cable through the cable guide Fasten the wire harness, starter motor lead, and starter cable with plastic bandFace the end of the plastic band down
Pass plastic band through the hole in the fuel tank shield, and then fasten the wire harness, starter motor lead, and starter cable with the plastic bandThe end of the plastic band should be under the frame, facing inward Route the wire harness and starter motor lead above the starter cable Fasten the wire harness and starter motor lead with plastic bandFace the end of the plastic band inward