1987-2009 Yamaha ATV YFM350X Warrior Raptor Service Manual, Page 166Get this manual
WIRE CYLINDER WIRE CYLINDER REMOVAL 1Remove:Front fender -Fuel tank 2Unhook the rubber band and slide the band3Open:Cover (wire cylinder) 4Disconnect: -Throttle cable (throttle lever side) CD -Piston valve cable (carburetor side) (2) -Throttle valve cable (carburetor side)
Before removing the piston valve cable and throttle valve cable, make sure that the ad" justers and locknuts on the carburetor side are fully tightenedIf not, the throttle does not operate properly