1987-2009 Yamaha ATV YFM350X Warrior Raptor Service Manual, Page 77Get this manual
TOE-IN ADJUSTMENTTIRE INSPECTION
Loosen the locknutsttle-rod end) CD of both tie-rods The same number of turns should be given to both tie-rods right and left until the specified toe-in is obtained, so that the lengths of the rods will be kept the same Tighten the rod end locknuts of both tierods
Locknut(rod end): 30 Nm (3.0 kg, 22 ft Ib) AWARNING Be sure that both tie-rods are turned the same amountIf not, the machine will drift right or left even though the handlebar is positioned straight which may lead to mishandling and accident After setting the toe-in to specification, run the machine slowly for same distance with hands placed lightly on the handlebar and check that the handlebar responds correctlyIf not, turn either the right or left tie-rod within the toe-in specification