1987-2003 Yamaha YFZ350 Banshee supplementary service manual, Page 208Get this manual
STEERING KNUCKLES AND TIE-ROD ENDS
NOTE: The threads (b) on both tie-rod ends must be of the same length
Tighten the locknuts
Locknut (Tie-rod): 30 Nm 13.0 rnwkg, 22 ft.lb)
4Install: Tie-rods (Left and right)
NOTE: Be sure to position the tie-rod so that its white painted mark (T) is right-hand rod
5Tighten: Nuts (Tie-rod end)