1987-2003 Yamaha YFZ350 Banshee supplementary service manual, Page 205Get this manual
NOTE: Apply lithium soap base grease to the bearing and oil seals Bearing Holder: 40 m (4.0 m-kg, 2s )
2Install: Steering shaft
Make sure the brake hoses and pipes are properly routed, and are not damaged or twisted
3Tighten: Nuts (Tie-rod end) Nut (Steering shaft)
Nuts (Tie-rod End): 25 (2.5m-kg, 18) Nut (Steering Shaft): 30 (3.0 m-kg, 22)
4Install: Cotter pins (New)
Always use new cotter pin