2009 Suzuki 400 LTZ Quad Sport Service Manual, Page 481Get this manual
9E-3 Body Structure:
Seat Rail Removal and Installation
B933H29506005
Removal 1) Remove the seat and rear fenderRefer to "Exterior Parts Removal and Installation in Section 9D (Page 9D-4)"2) Remove the mufflerRefer to "MufflerExhaust Pipe Removal and Installation in Section 1K (Page 1K-3)"3) Remove the rear combination lightRefer to "Rear Combination Light Removal and Installation in Section 9B (Page 9B-4)"4) Remove the rear gripRefer to "Rear Grip Removal and Installation (Page 9E-2)"5) Disconnect the clamps and remove the air cleaner box mounting bolts (1)I933H1950010-01
Installation Install the seat rail in the reverse order of removalPay attention to the following point: Apply thread lock to the footrest mud guard mounting bolts (1) and tighten them: Thread lock cement 9900032110 (THREAD LOCK CEMENT SUPER 1322 or equivalent) Tighten the seat rail mounting bolts (2) to the specified torqueTightening torque Seat rail mounting bolt (a): 66 Nm (6.6 kgf-m, 47.5 lb-ft)