2009 Suzuki 400 LTZ Quad Sport Service Manual, Page 475Get this manual
9D-5 Exterior Parts: 2) Disconnect the ignition switch coupler (4)3) Remove the screw (5)7) Remove the front fender bracket (11), left and right 11
I933H1940010-01 I933H1940004-02
4) Remove the reverse selection knob (6) and screw (7)6 7
Installation Install the side cover and front fender in the reverse order of removalPay attention to the following point: Apply thread lock to the front fender mounting screws and tighten them to the specified torque: Thread lock cement 9900032110 (THREAD LOCK CEMENT SUPER 1322 or equivalent) Tightening torque Front fender mounting screw (a): 12 Nm (1.2 kgfm, 8.5 lb-ft)