2009 Suzuki 400 LTZ Quad Sport Service Manual, Page 452Get this manual
6B-11 SteeringHandlebar: Steering shaft bushing Inspect the steering shaft bushing for wear or damageIf any defects are found, replace the steering shaft bushing with new one3) Temporarily tighten the four lock-nuts4) Check that the distance "C" and "D" are equal, as shownIf the distances are not equal, adjust the tierod to the right or left until the toe-out is within specificationCheck the toe-out again by measuring distances "A" and "B"5) If the toe-out is not within specification, repeat the adjustment as above until the proper toe-out is obtained and distances "C" and "D" become equal"A"
I933H1620044-01
Toe-out Adjustment
B933H26206007
Adjust the toe-out as follows: 1) Inspect the toe-outRefer to "Steering System Inspection in Section 0B (Page 0B-22)"2) Loosen the lock-nuts (1) and (2) on each tie-rod