2009 Suzuki 400 LTZ Quad Sport Service Manual, Page 446Get this manual
6B-5 SteeringHandlebar: Connect the starter cable (3) to the starter lever Apply grease to the end of starter cable (3): Grease 9900025160 (Water resistance grease or equivalent) Insert the projection "D" of the handlebar switch box into the hole of the handlebars Handlebars Inspection
Refer to "Handlebars Removal and Installation (Page 6B-3)"Inspect the handlebars for distortion or damageIf any defects are found, replace the handlebars with new one
B933H26206004
I831G1620019-02 I933H1620013-03
Install the clutch lever assemblyRefer to "Clutch Lever Removal and Installation in Section 5C (Page 5C-3)" Install the right grip as the same manner of left grip Install the front brake master cylinderRefer to "Front Brake Master Cylinder Assembly Removal and Installation in Section 4A (Page 4A-11)" Align the punch mark "E" on the handlebars with the mating surface of the throttle lever case Tighten the throttle lever case bolts