2009 Suzuki 400 LTZ Quad Sport Service Manual, Page 445Get this manual
SteeringHandlebar: 10) Remove the handlebar lower holder nuts and washer (12)11) Remove the handlebar lower holder (13)13
Align the punch mark "B" on the handlebars with the mating surface of handlebar holder First tighten the bolts (1) to the specified torque and then tighten the bolts (2) to the specified torqueNOTE The higher portion of handlebar holder must face forward, so that the clearance "a" of holder is in back of the handlebarsTightening torque Handlebar clamp bolt (a): 26 Nm (2.6 kgf-m, 19.0 lb-ft)
I933H1620009-01
Installation Install the handlebars in the reverse order of removalPay attention to the following points: Set the handlebar holder with facing the projection "A" forward1 "B" "A"