2009 Suzuki 400 LTZ Quad Sport Service Manual, Page 407Get this manual
Manual Transmission: Installation Install the reverse lock cable in the reverse order of removalPay attention to the following points: Install the reverse lock cable as shown in the rear brake cable routing diagramRefer to "Hose and Cable Routing Diagram in Section 4A (Page 4A-3)" Install the spring (1) with the spring end "A" to the groove "B" on the housing 5B-3
Connect the reverse lock cable (3) to the rotor (4) through the hole of the housing Apply grease to the end of the reverse lock cable (3) and rotor (4): Grease 9900025160 (Water resistance grease or equivalent) When installing the rotor, hook the spring end "C" on the concave portion "D" of rotor (4)