2009 Suzuki 400 LTZ Quad Sport Service Manual, Page 390Get this manual
Rear Brakes: 7) Install the new lock washer (6) and temporarily tighten the pad mounting pins (1)8) Apply small quantity of thread lock to the brake caliper mounting bolts (4): Thread lock cement 9900032030 (THREAD LOCK CEMENT SUPER 1303 or equivalent) 9) Tighten the brake caliper mounting bolts (4) to the specified torqueTightening torque Brake caliper mounting bolt (a): 26 Nm (2.6 kgfm, 19.0 lb-ft)
Rear Brake Caliper Removal and Installation
B933H24306004
Removal 1) Drain brake fluidRefer to "Brake Fluid Replacement in Section 4A (Page 4A-8)"2) Remove the parking brakeRefer to "Parking Brake Removal and Installation in Section 4D (Page 4D2)"3) Disconnect the brake hose from the caliper by removing the union bolt (1) and catch the brake fluid in suitable receptacleNOTE Place rag underneath the union bolt on the brake caliper to catch any split brake fluid