2009 Suzuki 400 LTZ Quad Sport Service Manual, Page 326Get this manual
2C-14 Rear Suspension:
Swingarm Dust SealBearing Removal and Installation
Installation!
Refer to "Rear Axle Assembly Construction in Section 3A (Page 3A-3)"
B933H22306015
CAUTION
The removed dust seals, bushings and bearings must be replaced with new onesNOTE Stamped marks on the dust seals and bearings must face outside1) Install the bushings and bearings with the special tool and suitable size socket wrenchSpecial tool (A): 0992484510 (Bearing installer set) NOTE Press the bushings at 6.0 mm (0.23 in) depth from swingarm edge and bearings at 5.0 mm (0.20 in) depth from swingarm edgeRefer to "Rear Axle Assembly Construction in Section 3A (Page 3A-3)"2) Apply grease to the bushings and bearings: Grease 9900025160 (Water resistance grease or equivalent)