2009 Suzuki 400 LTZ Quad Sport Service Manual, Page 322Get this manual
2C-10 Rear Suspension:
Cushion Rod Dust SealBearing Removal and Installation
Removal 1) Remove the cushion rodRefer to "Cushion RodCushion Lever Removal and Installation (Page 2C7)"2) Remove the spacer (1)
Installation!
B933H22306012
CAUTION
The removed dust seals and bearings must be replaced with new onesNOTE Stamped marks on the dust seals and bearings must face outside1) Install the bearings with the special tool and suitable size socket wrenchSpecial tool (A): 0992484521 (Bearing installer set) NOTE Position of the bearings is shown in the figureI933H1230036-01