2009 Suzuki 400 LTZ Quad Sport Service Manual, Page 263Get this manual
1I-4 Starting System:
Starter Motor Removal and Installation
B933H21906002
Removal 1) Turn the ignition switch OFF and disconnect the battery () lead wireRefer to "Battery Removal and Installation in Section 1J (Page 1J-12)"2) Drain engine coolantRefer to "Cooling System Inspection in Section 0B (Page 0B-13)"3) Remove the exhaust pipeRefer to "MufflerExhaust Pipe Removal and Installation in Section 1K (Page 1K-3)"4) Remove the starter motor lead wire (1) and starter motor (2)
Tighten the starter motor mounting bolts (1) with the battery () lead wire (2) and starter motor lead wire mounting nut (3) to the specified torqueRefer to "Wiring Harness Routing Diagram in Section 9A (Page 9A-3)"Tightening torque Starter motor mounting bolt (a): 10 Nm (1.0 kgfm, 7.0 lb-ft) Starter motor lead wire mounting nut (b): Nm0.6 kgf-m, 4.5 lb-ft)
I933H1190006-01
Starter Motor Disassembly and Assembly