2009 Suzuki 400 LTZ Quad Sport Service Manual, Page 195Get this manual
1D-53 Engine Mechanical: Install the washer (15) and new snap ring (16)10! CAUTION
The removed snap ring (16) must be replaced with new oneSpecial tool0990006107 (Snap ring pliers)
I933H1140210-01
Apply small quantity of thread lock to the gearshift pawl lifter screws, and then tighten the specified torque: Thread lock cement 9900032110 (THREAD LOCK CEMENT SUPER 1322 or equivalent) Tightening torque Gearshift pawl lifter screw (c): Nm (0.9 kgf-m, 6.5 lb-ft)
I933H1140213-02
Oil pump Apply engine oil to the sliding surfaces of the oil pump inner rotor, outer rotor and shaft When installing the inner rotor (1), align the pin (2) with the groove (3) When installing the inner rotor and outer rotor, face the punched marks "A" on the inner rotor and outer rotor to the outside"A" 1