2009 Suzuki 400 LTZ Quad Sport Service Manual, Page 191Get this manual
1D-49 Engine Mechanical: Balancer shaft Install the balancer shaft (1)Crankcase Thoroughly remove the sealant and oil stains on the mating surface of the right and left crankcases Install the dowel pins to the left crankcase Apply engine oil to the conrod big end and to the transmission gearsI933H1140188-01
TransmissionGear shift Install the transmission componentRefer to "Transmission Removal and Installation in Section 5B (Page 5B-5)"
I933H1140190-01
Apply bond to the mating surface of the right crankcase as followsNOTE Spread the sealant on surfaces thinly to form an even layer, and assemble the crankcases within few minutes Take extreme care not to apply any bond to the oil hole, oil groove and bearing Apply to distorted surfaces as it forms comparatively thick filmI933H1140189-01