2009 Suzuki 400 LTZ Quad Sport Service Manual, Page 45Get this manual
Maintenance and Lubrication: Check that the rear axle nut is tightened to it specified torqueIf the specified torque is lower than specification, tighten the rear axle nut and lock-nut as followsSpecial tool (A): 0994092460 (Rear axle nut wrench set) Tightening torque Rear axle nut (a): 240 Nm (24.0 kgf-m, 173.5 lb-ft) Rear axle lock-nut (b): 240 Nm (24.0 kgf-m, 173.5 lb-ft) 5) Apply thread lock to the rear axle nut bolt (3): Thread lock cement 9900032110 (THREAD LOCK CEMENT SUPER 1322 or equivalent)
6) Loosen the rear axle nut (2)7) Fit the stopper ring (4)8) Tighten the rear axle nut (2) to the specified torque with the special toolRefer to "Rear Axle Nut and Lock-Nut Tightening Torque in Section 3A (Page 3A7)"Special tool (A): 0994092460 (Rear axle nut wrench set)
Tightening torque Rear axle nut (a): 240 Nm (24.0 kgf-m, 173.5 lbft)