2008 Suzuki LT-A400/F, LT-F400/F ATV Service Manual, Page 497Get this manual
Body Structure:
Footrest Removal and Installation
B827H29506003
Removal 1) Remove the footrest mudguardRefer to "Exterior Parts Removal and Installation in Section 9D (Page 9D-3)"2) Remove the gearshift link arm (1) from the engine(LT-F400F LH)3) Remove the footrest (2)Installation Install the footrest in the reverse order of removalPay attention to the following point: Install the gearshift lever assembly to the footrest(LTF400F LH)Refer to "Gearshift Lever Removal and Installation (LT-F400F) in Section 5B (Page 5B-8)" Apply thread lock to the footrest mounting bolts (M10) and tighten them to the special torque: Thread lock cement 9900032110 (THREAD LOCK CEMENT SUPER 1322 or equivalent) Tightening torque Footrest mounting bolt (M10) (a): 55 Nm (5.5 kgfm, 40.0 lb-ft) Footrest mounting bolt (M8) (b): 25 Nm (2.5 kgfm, 18.0 lb-ft)