2008 Suzuki LT-A400/F, LT-F400/F ATV Service Manual, Page 457Get this manual
SteeringHandlebar: Installation Install the handlebars in the reverse order of removalPay attention to the following points: Insert the rear brake lever holder (1) and starter lever (2) onto the handlebars 6B-4
Tighten the handlebar clamp bolts (3) to the specified torqueNOTE First tighten the handlebar clamp bolts (3) (front ones) to the specified torqueTightening torque Handlebar clamp bolt (a): 26 Nm (2.6 kgf-m, 19.0 lb-ft)(a)
I827H1620008-01
Apply handle grip bond "A" onto the left handlebar before installing the left grip: Handle grip bond (Handle Grip Bond (commercially available))
"a": Clearance