2008 Suzuki LT-A400/F, LT-F400/F ATV Service Manual, Page 423Get this manual
Automatic Transmission: Clutch Wheel Inspect the clutch wheel for any abnormal surface damageMeasure the inside diameter of the clutch wheelIf the measurement exceeds the service limit, replace the clutch wheel with new oneClutch wheel I.DService limit: 140.5 mm (5.53 in) NOTE
When Installing the one way clutch (1) into the clutch wheel, make sure that the "OUTSIDE" letter "A" in the one way clutch faces to the clutch wheel
I831G1510086-01
I827H1510078-01
V-belt Inner Cover Bearing Rotate the inner race by finger to inspect for abnormal play, noise and smooth rotationIf there is anything unusual, replace the bearing with new one"a" "a"
Install the clutch shoe (2) into the clutch wheel and turn the clutch shoe by hand to inspect the one way clutch for smooth movementThe clutch shoe turns one direction onlyIf large resistance is felt to rotation, inspect the one way clutch for damage or one way clutch contacting surface of the clutch shoe for wear or damageIf any defects are found, replace them with new ones2