2008 Suzuki LT-A400/F, LT-F400/F ATV Service Manual, Page 414Get this manual
5A-13 Automatic Transmission: 9) Remove the oil seals (9) and (10) from the movable driven faceNOTE If there are no abnormal conditions, the oil seal removal is not necessary Install the O-rings (1) to the movable driven face Apply grease to the oil seal lips, O-rings and inside groove of movable driven face CAUTION
Replace the O-rings (1) with new ones: Grease 9900025010 (SUZUKI SUPER GREASE or equivalent)
CAUTION
Wipe off any excess grease thoroughly Take care not to apply grease to the contact surface of the drive V-belt
I827H1510036-01
Assembly Assemble the movable driven face in the reverse order of disassemblyPay attention to the following points: Install the oil seals with the special toolSpecial tool (A): 0991370210 (Bearing installer set)