2008 Suzuki LT-A400/F, LT-F400/F ATV Service Manual, Page 381Get this manual
Front Brakes: Install the piston seal as shown in the figure Install the brake padsRefer to "Front Brake Pad Replacement (Page 4B-2)" 4B-6
Front Brake Caliper Parts Inspection
Refer to "Front Brake Caliper Disassembly and Assembly (Page 4B-4)"
B827H24206006
Brake Caliper Cylinder Inspect the brake caliper cylinder wall for nicks, scratches or other damageIf any damage is found, replace the caliper with new oneI649G1420013-02
Apply thread lock to the caliper holder slide pin (3): Thread lock cement 9900032030 (THREAD LOCK CEMENT SUPER 1303 or equivalent) Tighten the caliper holder slide pin nut (4) and caliper holder pin (5) to the specified torqueTightening torque Caliper holder slide pin nut (a): 23 Nm (2.3 kgfm, 16.5 lb-ft) Caliper holder pin (b): 18 Nm (1.8 kgf-m, 13.0 lbft)