2008 Suzuki LT-A400/F, LT-F400/F ATV Service Manual, Page 379Get this manual
Front Brakes: Installation Install the brake caliper in the reverse order of removalPay attention to the following points: Apply small quantity of thread lock to the front brake caliper mounting bolts (1): Thread lock cement 9900032030 (THREAD LOCK CEMENT SUPER 1303 or equivalent) Tighten the brake caliper mounting bolts (1) to the specified torqueTightening torque Brake caliper mounting bolt (a): 26 Nm (2.6 kgfm, 19.0 lb-ft) After setting the brake hose union to the stopper, tighten the union bolt (2) to the specified torque 4B-4
Front Brake Caliper Disassembly and Assembly
Refer to "Front Brake Caliper Removal and Installation (Page 4B-3)"
B827H24206005
Disassembly 1) Remove the brake padsRefer to "Front Brake Pad Replacement (Page 4B-2)"2) Remove the pad spring (1)
CAUTIONI827H1420009-01
The seal washers should be replaced with the new ones to prevent fluid leakageTightening torque Front brake hose union bolt (b): 23 Nm (2.3 kgfm, 16.5 lb-ft)