2008 Suzuki LT-A400/F, LT-F400/F ATV Service Manual, Page 374Get this manual
4A-13 Brake Control System and Diagnosis: 4) Remove the nut (6), washer (7), O-rings (8) and bolt (9)5) Remove the rear brake pedal (10) Tighten the rear brake pedal pivot nut to the specified torqueTightening torque Rear brake pedal pivot nut (a): 12 Nm (1.2 kgf-m, 8.5 lb-ft)
I827H1410033-02
Installation Install the rear brake pedal in the reverse order of removalPay attention to the following points: Apply grease to the O-rings and brake pedal pivot
I827H1410038-01
Install the brake pedal spring and brake light switch spring correctlyRefer to "Rear Brake Pedal Construction (Page 4A-12)"Special tool0992020310 (Clutch spring hook) After installing the rear brake pedal, check the rear brake pedal free travelRefer to "Rear Brake PedalRear Brake (Parking Brake) Lever Inspection and Adjustment in Section 0B (Page 0B-16)"