2008 Suzuki LT-A400/F, LT-F400/F ATV Service Manual, Page 368Get this manual
4A-7 Brake Control System and Diagnosis: 6) Close the air bleeder valve (1) and disconnect the clear hoseTightening torque Front brake air bleeder valve (a): Nm (0.6 kgfm, 4.5 lb-ft) 3) Remove the front brake hoses as shown in the front brake hose routing diagramRefer to "Front Brake Hose Routing Diagram (Page 4A-1)"Installation! CAUTION
The seal washers should be replaced with the new ones to prevent fluid leakage1) Install the front brake hoses as shown in the front brake hose routing diagramRefer to "Front Brake Hose Routing Diagram (Page 4A-1)"2) Tighten the brake flare nut (1) to the specified torqueI827H1410015-01
7) Fill the reservoir with brake fluid
Tightening torque Brake pipe flare nut (a): 16 Nm (1.6 kgf-m, 11.5 lb-ft)
I827H1410016-01
I827H1410018-01
8) Reinstall the diaphragm and reservoir cap