2008 Suzuki LT-A400/F, LT-F400/F ATV Service Manual, Page 344Get this manual
3D-10 Propeller Shafts: After reassembling the universal joint, check the joint movement smoothlyIf large resistance is felt to movement, tap the bearing with plastic mallet lightly Stake the nut with center punch I827H1340053-01
I827H1340050-02
Install the driven bevel gear (4), bearing (5), washer and nutNOTE The wider side "C" of the bearing should be positioned driven bevel gear side
Front Output Shaft Disassembly and Assembly (LT-A400F, LT-F400F)
Refer to "Output Shaft Removal and Installation (Page 3D-3)"
B827H23406005
Disassembly 1) Remove the oil seal (1), circlip (2) and snap ring (3)Special tool0990006107 (Snap ring pliers)