2008 Suzuki LT-A400/F, LT-F400/F ATV Service Manual, Page 339Get this manual
Propeller Shafts: 4) Remove the C-rings (3) from the universal joint (4)3D-5
9) Remove the washer, joint yoke (5), oil seal (6), bearing (7) and shim (8)
I827H1340020-01
I827H1340024-01
5) Remove the bearings by tapping them with the special tool and hammerSpecial tool (A): 0991370210 (Bearing installer set) 6) Remove the universal joint
Assembly Assemble the rear output shaft in the reverse order of disassemblyPay attention to the following points: NOTE Apply engine oil to each rotating part before reassembling