2008 Suzuki LT-A400/F, LT-F400/F ATV Service Manual, Page 324Get this manual
3C-13 Transfer:
Transfer Gearshift Cam Disassembly and Assembly (LT-A400F)
Refer to "Transfer Removal and Installation (LT-A400F) (Page 3C-4)"Disassembly!
B827H23306012
When installing new snap ring (1), pay attention to its directionFit it to the side where the thrust is as shown in the figure"A"
CAUTION
Identify the position of each removed partOrganize the parts in their respective groups so that they can be reinstalled in their original positionsDisassemble the transfer gearshift cam assemblyRefer to "Transfer Gearshift Cam Components (LT-A400F) (Page 3C-10)" Assembly Assemble the gearshift cam in the reverse order of disassemblyPay attention to the following points: NOTE When reassembling the gearshift cam, attention must be given to the location and position of washer and snap ringsThe cross sectional view shows the correct position of the cams, washer and snap ringsRefer to "Gearshift System Construction (LT-A400F) (Page 3C-12)"!