2008 Suzuki LT-A400/F, LT-F400/F ATV Service Manual, Page 292Get this manual
3B-17 Differential: 4) Install the front drive (differential) case cover and tighten the bolts to the special torque diagonallyNOTE Do not apply bond to the mating surface of the gear case Do not apply thread lock to the case cover boltsTightening torque Front drive (differential) gear case cover bolt (a): 23 Nm (2.3 kgf-m, 16.5 lb-ft) 7) Select the proper size of shim(-s) from the table, according the compressed solder thicknessList of shims (for left side) Part NoShim thickness 0.70 mm (0.0276 in) 0.75 mm (0.0295 in) 0.80 mm (0.0315 in) 0.85 mm (0.0335 in) 0.90 mm (0.0354 in) 0.95 mm (0.0374 in) 1.00 mm (0.0394 in) 27445-38FA0 1.05 mm (0.0413 in) (Shim set: 16 pcs 1.10 mm (0.0433 in) 1.15 mm (0.0453 in) 1.20 mm (0.0472 in) 1.25 mm (0.0492 in) 1.30 mm (0.0512 in) 1.35 mm (0.0531 in) 1.40 mm (0.0551 in) 1.45 mm (0.0571 in) 8) After selecting the proper size of shim(-s), check or adjust the backlash and tooth contact(a) I827H1320057-01